ReVolt: 3-channel all-analog guitar and bass amp simulators empower players with the ultimate in rock-solid reliability and must-have foundation tone.
ReVolt Guitar
Introducing ReVolt Guitar: the player’s choice when it comes to must-have tone that’s primed for virtually any musical scenario. Center stage on ReVolt Guitar are a trio of tonally-distinct channels inspired by a Fender® Bassman 100, a Marshall® JMP Superlead and a Soldano® SLO 100. For players looking to cut above the mix, or simply drive ReVolt Guitar’s all-analog signal path, the integrated OD-Boost circuit is primed to deliver on all counts. Dial in your boost level, tap the active channel’s footswitch, and dive headfirst into a world of boosted clarity and lush harmonics.
ReVolt Guitar – Key Features
- 3 channel guitar amp simulator featuring an all analog signal path
- Inject some warmth and bite into your tone courtesy of a 12AX7 preamp tube running at high voltage
- Integrated OD-Boost circuit with dedicated switching and level control
- Expertly engineered Analog Cab Sim for seamless DI whether it’s in the studio or on stage
- 4-Cable mode, FX Loop and MIDI In/Out for effortless integration into existing setups
- Robust, made-to-move design that’s perfectly sized for pedalboards and fly-rigs
- Includes the ReVolt: Series-G DynIR Cabinet Collection (valued at 100€/$) featuring 10 exquisite DynIR captures inspired by leading guitar amplifier brands
ReVolt Bass
ReVolt Bass has been engineered for nothing short of unbridled tonal excellence. With 3 channels inspired by legendary bass tones including an Ampeg® SVT ‘76, a Marshall® 1992 JMP Super Bass Mark II, and a custom proprietary high gain Bass amp, it’s a sure-fire guarantee for reliable tone whatever the situation demands. When you need best-of-both-worlds – the rounded thump of your dry DI signal with the snarl of surgically tuned distortion – ReVolt Bass’ Modern Drive channel is the answer. Dial in your wet/dry blend and enter a world of saturated Analog bliss without sacrificing the pin-point precision you need.
ReVolt Bass – Key Features
- 3 channel bass amp simulator/DI featuring an all analog signal path
- Inject some warmth and bite into your tone courtesy of a 12AX7 preamp tube running at high voltage
- Integrated Drive Channel Dry/Wet Blend for enhanced tone-shaping
- Expertly engineered Analog Cab Sim for seamless DI whether it’s in the studio or on stage
- 4-Cable mode, FX Loop and MIDI In/Out for effortless integration into existing setups
- Robust, made-to-move design that’s perfectly sized for pedalboards and fly-rigs
- Includes the ReVolt: Series-B DynIR Cabinet Collection (valued at 100€/$) featuring 10 exquisite DynIR captures inspired by leading bass amplifier brands
Mojo Maker
It’s a fact: DI is convenient. It’s reliable. It’s a pure unadulterated tone that’s surgically controlled to the smallest iota. There’s just one snag; It lacks the all-important warmth synonymous with tube amps. The ReVolt Series’ 12AX7 preamp tube running at 200V has been expertly tuned to enrich your tone with undeniable tube mojo. The result is revolutionary. You retain all the convenience of a DI signal, now with the warmth, the bite, the all-important response only tubes can provide.
Dial it in
The right EQ is paramount when shaping pristine guitar and bass tones. The ReVolt Series are outfitted with a two-band EQ on channel 1, and a shared 3-band EQ on channels 2 and 3. It’s everything you demand from an EQ: musically harmonic in all the right places, and deftly tuned for precision.
Drop the Mic
A great space, pro-grade mics and an expansive recording gear arsenal are all vital ingredients in the recipe for stand-out tone. The problem? They’re never a sure-fire guarantee. ReVolt Guitar’s and ReVolt Bass’ analog cabinet simulation gives you one less headache in the quest for reliable sonics. Switch on the cab sim, hookup to a mixer, PA or FRFR cabinet and you’re set for virtually any recording or performance scenario.
Hookup Flexibility
Two notes gets it, you expect the utmost versatility in the all-important connectivity department. The ReVolt Series delivers whatever the setup scenario. First, go direct – it’s simple and sounds phenomenal. For total integration, switch on the 4-Cable mode and add 3 pristine channels to your amp head. Finally, get the most from a Hybrid setup and hook-up ReVolt to your amps FX return; you get the best out of its poweramp stage fused with the natural colour of your cab. For the Pedal fanatics, The ReVolt Series’ FX return and stellar font-loading capability, offer versatile options when it comes to getting the best from your pedal collection.
The ReVolt Series will make their public debut at NAMM 2022 on the Two notes booth, Hall D, Booth #5239. ReVolt Guitar and ReVolt Bass will ship with the following MAP / MSRPs
– 399 USD
– 399 Euro MSRP
– 349 UK MSRP
Current retail availability is slated for September 2022 with pre-orders available immediately from all Two notes stockists and the Two notes website directly.
Hello
I just want to know if both outputs are affected by cab sim or juste the XLR one ?
thank you
Only the XLR is cab sim 🙂
Just to be clear. It is possible to send a XLR output (with cabsim/IR on) to the FOH, and at the same time connect the jack-output (without IR) to the speaker cabinet. Right?
found it. There is no amp in it 🙂
Great stuff – please let us know if there is anything else we can help you with!
Do you have electronic manual for the Revolt Guitar model to review prior to purchase ?
Not yet, but there will be soon!
Is there an expected ship date
Not a confirmed one, we will know soon though!
Can the tube be changed?
Yep!
Is effect loop serial or parallel? If I connect digital fx, it will affect drive signal?
It’s series!
What are the MIDI capabilities?!
Good morning Keenan, Thank you for getting in touch. ReVolt includes the following MIDI features:
– Boost state (ReVolt Guitar Only)
– FX Loop state
– Channel Number
– Bypass State
– MIDI Learn
Please let us know if there is anything else we can help you with.
Kind regards,
Ross
can this be used in front of an amp that does not have an effects loop? Can this be used into another petals send and return and controlled by its midi?
Hi Terence,
Thanks for getting in touch. Yes, you can frontload your amp with ReVolt but we would advise zero-ing the EQ on ReVolt’s channels if you were to configure your setup in this manner. In terms of other pedals, again yes you sure can! Let us know if there is anything else we can help you with!